Pro Flight™ Yoke for PC and Mac

PRODUCT DESCRIPTION

The Aspiring Pilot's Introduction to Flight Simulation Hardware

Whether your preferred plane is commercial or private, the Saitek Pro Flight Yoke with included Throttle Quadrant is a must-have for beginning and advanced flight simulation enthusiasts. Delivering realistic and precise control while enhancing muscle memory, the Yoke and Throttle Quadrant with five total axes simulate what it feels like to truly fly an aircraft. Saitek's Pro Flight equipment is modular and interchangeable, and the Yoke anchors a comprehensive flight sim setup. There's no better way to begin your flight sim experience than with Saitek, the market leader in high-performance flight simulation hardware.

Simple Plug-and-Play Installation

The Throttle Quadrant connects to the Yoke via PS/2 connector cable, and the Yoke directly connects to a USB port on your PC or Mac. You can then simply load your favorite sim, set controls in the sim's options menu, and you're all set for virtual flight without the need to load drivers or install extra software. The Yoke's four-foot-long USB cable frees you to place the controls where they're most convenient for you.

Pro Flight Yoke with Durable Metal Shaft

Unlike the mostly plastic offerings on the market, Saitek's Pro Flight Yoke utilizes a durable stainless steel shaft with precision bearings for smooth, predictable elevator and aileron control. Whether navigating the front-to-back, side-to-side, or vertical axes, all controls are right at your fingertips. The built-in stopwatch is perfect for timing approaches, and if your PC lacks available USB ports, an integrated USB Hub* provides a docking station for additional Saitek hardware

Pro Flight Throttle Quadrant with Detachable Knobs

Every Pro Flight Yoke includes a Pro Flight Throttle Quadrant. For precise control over multi-engine aircraft, additional Throttle Quadrants* are available. The Quadrant's levers are fully programmable. Detachable lever knobs enable you to customize your flight by configuring any combination of throttle, flaps, mixture or propeller pitch. Simply remove the lever knobs, create the configuration that works best for you, and then assign commands to the levers in your favorite sim. The levers' detents – physical markings indicating where a certain action takes places – simplify control of your plane's idle and reverse thrusters.

Powerful Programming Software (PC Only)

The Yoke and Quadrant combo comes with 25 buttons and switch positions, more than enough to assign the essential controls in your favorite sim. However, if you need even more programming capability, simply go to the Downloads page* on Saitek.com and download the Drivers and Software for your computer's operating system. You can then use a three-position switch to cycle through three different modes. The ability to switch modes elevates the total number of user-definable controls to 75.

Rugged Mounting Hardware

Saitek's Pro Flight Yoke and Throttle Quadrant are both equipped with adaptable mounting clamps which provide the freedom to configure your kit in any manner you see fit. Whether on top of your desk or clamped to the front, you can securely place the controls exactly where you want them.

Fully Customizable to Meet Your Needs

Saitek's Pro Flight Yoke is the foundation of an authentic flight sim experience and built to harmonize with many other Saitek flight simulation products. Saitek's range of Instrument Panels are modular and interchangeable by design, and can be situated one on top of another or side-by-side. Want the Altimeter above the Compass? Done. Want your Vertical Speed Indicator to the left of your Airborne Direction Finder? Go for it. It's your choice. Easy-to-use mounting brackets provide the means to arrange your flight simulation setup in a configuration only limited by your imagination.

Saitek Pro Flight Simulator Cockpit Shell – The Ideal Hangar for Flight Sim Gear

Our cockpit shell is styled after GA trainers, and ready to accept your current and future flight sim hardware. Begin with Saitek's Pro Flight Yoke, then easily add Rudder Pedals and a multitude of Switch, Navigation, and Instrument Panels to fully equip your flight simulator. Commercial or private, seasoned or novice, you have the ability to build your setup with all the essentials needed to vastly improve your skill set and muscle memory

Get the Ultimate Pre-made Flight Sim Cockpit

Saitek now offers two solutions which effectively remove the guesswork from creating your own flight sim setup. The first solution is a solidly built, custom cockpit frame which securely houses all of your Pro Flight gear. The second solution is even more robust – a fully loaded, professional-grade cockpit which includes all controls and instruments to qualify as a complete procedure trainer.

Product Includes

  • Saitek Pro Flight Yoke with 4ft/1.2m USB Connector Cable
  • Saitek Pro Flight Throttle Quadrant with 4.5ft/1.4m PS/2 Connector Cable
  • 2 Desk Clamps

Flight Simulation Software Compatibility:

  • FSX - Flight Simulator X (PC only)
  • X-Plane 10(PC and Mac)
  • Prepar3D® 2.2(PC only)
  • Most Other Flight Simulation Software

Product Spec

  • Durable stainless steel shaft with precision bearings gives smooth and predictable elevator and aileron control
  • Downloadable programming software configures controls to suit your preferred flying style
  • Integrated chronograph accurately times each leg of your flight plan 14 buttons, POV hat switch, and 3-position mode switch
  • Desk clamps secure Yoke and Throttle Quadrant to almost any flat surface for maximum control
  • Backed by a two-year limited manufacturer's warranty

Minimum System Requirements:

  • Windows®: XP, Vista, 7, 8, 8.1
  • Mac: OS X 10.6.8 or Later
  • 3x USB 2.0 Ports